7 min read
Pick Cosmos From a Strip That Can Stand Up to Wind
Set a support before tall cosmos fill out, keep a clear picking side and learn when leaning stems can still be saved.

On this page
A strip of tall cosmos is never quite still. It leans toward an opening and shifts when the wind crosses the garden. That movement is part of the reason to grow it. After an ordinary summer storm, though, a whole row can be lying over the path, with most of the flowers still recognizable and only a few easy to pick. Support works best while the stems are small and there is room to reach between them. If the first opportunity to put in a cane comes after the entire canopy is wet and tangled, the problem has already become much harder.
Garden cosmos is Cosmos bipinnatus. The annual has fine divided leaves and summer flowers with flat, broad rays. The varieties include compact plants for edging as well as tall ones capable of standing above other flowers. If you want to cut blooms regularly, choose the height and the place together. It is easier to collect a handful from a narrow strip with one open side than from a spectacular block you can only reach at the corners.
Decide which side is for picking
Try the walk with a bucket before you sow. Choose a spot with full sun and free drainage, then mark a narrow strip parallel to the route you want to use. Leave room to put the bucket down while taking a stem and a clear path to turn around. On a narrow bed, place the tall variety behind a lower plant only if you can reach the cosmos without pushing through that plant. In a bigger bed, a separate side path offers better access. An ornamental screen can still have an accessible back even when the flowers are mostly seen from the front.
Look where the wind usually comes through. A wall or hedge may give useful shelter, but a gap between two barriers can concentrate wind in one section. Remember that the mature canopy will catch much more wind than the young plants. Leave a little extra room at the exposed end. Place the shorter variety there if the useful height from the label is enough for your needs. Do the same where tall stems would obscure a view that should remain open. Mature height is a design choice long before it becomes a support problem.
Decide what support is appropriate. A row next to an accessible path can often use stakes joined by loose horizontal lines that contain the canopy. Another option is a flower support grid through which the stems grow. Use secure materials that will not present a hazard, and place all lines well inside the bed. If the strips of support are so widely spaced that branches will lie across the path between them, fit an additional support while the stakes and ground are visible. A sturdy, low arrangement can be easier to handle than a tall structure added late.
Sow with the end of the row in mind
Sow directly into warm soil after local frost danger has passed, or start under cover with enough light and warmth for sturdy young plants. Follow the cultivar instructions, covering seed lightly where indicated. Plants started under cover should be hardened off before they meet the wind and stronger light outside. Give the crop an adequately fertile, loose bed. A rough edge that remains extremely dry or a depression that retains water after rain will make it difficult to produce useful stems. Work the soil when it is ready and avoid packing it along the planting line.
Thin to the mature spacing of the variety. As you place the plants, view the row from one end. Try to leave enough room to reach the center of each plant once it has branched. Air and light enter more readily between plants that are not crammed together. If you think you have too few seedlings after thinning, wait to see how the survivors develop. Four branches on a plant with room to grow can occupy far more space than one stem at the time of the first decision.
Water the seedlings during establishment, including those closest to another crop that may take up moisture. Inspect older plants when dry weather is prolonged. A containerized group will generally need more frequent checks. Avoid adding large amounts of fertilizer to an already suitable bed simply because the first few plants are still small. A flower strip can develop large leaves without becoming easier to support or more useful to pick. Let the variety's normal growth show before judging what the soil needs.
Build the small supports before you need them
Put stakes in before roots and branches occupy all the available gaps. Set the first support level while the plants can find their way around it without force. Check that fasteners stay away from growing stems and that a line cannot be pulled into the path. A tall variety may use more than one level. The lower one can stabilize the middle of the main stems while the upper level keeps long branches from spreading across the bed. Let the flower heads rise above the support so they remain easy to cut.
When a seedling leans, guide it gradually. Thin flexible growth can be repositioned using a broad loose tie if needed. Leave allowance for the stem to thicken. If the bare stems are already rigid, keep the useful curve and provide support near where the weight falls. The aim is to carry the part with flowers and leaves, not to draw every plant into the same straight line. Avoid tying an entire tangled row tightly into a single bundle. Flowers held deep within that bundle will be harder to inspect and collect.
After a storm, start with one stem on the aisle side. Determine whether it is bent, uprooted or broken. A healthy root ball that shifted may be settled gently if the plant is still sound, while a torn stem is more useful cut cleanly above a healthy branch. Lift an intact bent stem only as far as it moves without cracking and support it there. Take any usable flowers before moving to the next stem. A wet plant takes up more space and weighs more. Work from the reachable edge rather than forcing your way across the middle.
Use the cut to leave a growing plant behind
For a simple bunch, take a stem as its flower is opening. Trace it to a useful branch point and decide how much length you need. A lower cut can give you a longer stem at the expense of the side shoots that would otherwise remain. Spread cuts around several plants instead of taking every good branch from the same small corner. Keep the stems you leave free to branch in useful positions. A regular visit to remove fading heads or collect flowers can extend the display while conditions support growth.
Check the view after you cut. A taller plant with unremarkable lower flowers may carry a useful outline if its main stems are left in place. On the edge of the row, a bloom almost touching the path is easy to cut before it becomes a reason for someone to brush into the plant. If several flowers have closed or faded, inspect for developing heads and decide which to leave. Allow seed to mature only where self-sowing is suitable. Volunteers from mixed cultivars may differ from the flowers you started with.
Clear stems that fall or become diseased, and check the soil during an extended dry period. Keep the route open as the canopy expands. A hard limit on where a branch can cross the picking side makes these small pruning choices easier. Where the flowers are visible from outside the garden but inaccessible from within, change the picking side next season rather than increasing the width of the same strip.
Check the ties before leaving any selected heads to mature. An emptying canopy can shift in wind and one remaining tall branch may swing farther than it did when the row was full. Trim or support that branch if it reaches the walk.
Compare the useful stems at the end of summer
Write down the height of the tallest season and the height at which you actually cut. A compact form may give more usable flowers near a busy walk while the tall plants work well against a broad open background. Move the divided strip if one end consistently falls into the only access route. Keep the measurements with the cultivar name so the next purchase is based on the actual branches you handled.
If you had enough stems and kept a clear path after wind, the support did its job even if you noticed it through the plants. If a longer line of tall cosmos would be difficult to reach, place the next batch in a second small strip with opening space between. Leave the plants room to move a little. Their fine leaves and flowers look best when you can approach from the side and select a stem without catching everything around it.
Further reading: Utah State University Extension guide to garden cosmos.



